# All About Exterior Window Shutters.

- Link: https://www.oldhouseguy.com/shutters/
- Published: 2014-02-13T19:57:17-05:00
- Author: Daniel Lane

Exterior window shutters are taken for granted as an easy to install, quick fix 
to improve curb appeal.

Unfortunately, few people understand the complexity of window shutters or the correct
way of hanging shutters.

What one thinks is a simple mistake will destroy a home’s curb appeal. Don’t let
this happen to you!

With historic wood shutters or plastic shutters, there is a LOT you need to know.

Read on and we will insure your success with shutters and curb appeal.

With a photo of your house we can also replace your plastic shutters with real wood
shutters to show you the difference and how we can improve the curb appeal of your
home.

[⌊wood window shutters are needed⌉⌊wood window shutters are needed⌉[

House without exterior window shutters

[⌊wood louvre shutters ⌉⌊wood louvre shutters ⌉[

Historic shutters. Operable shutters are now added.

## How Exterior Window Shutters Can Ruin the Appearance Of your Home

### And What You Can Do to Fix Them

Topics covered:

 * **The History of Exterior Window Shutters and How They Were Used.**
 * **Window Shutter Mistakes – Exterior Shutters Today vs Historic Shutters.**
 * **Exterior Shutter Hardware – Choosing the right Shutter Hinges.**
 * **Examples of Good versus Bad Window Shutters.**
 * **What Shutter Styles are Right for My House?**
 * **Painting Shutter Colors.**
 * **Purchasing Exterior Window Shutters.**

### There is a Lot More to Window Shutters Than You Think.

**Shutters:**

 * Make one of the greatest impacts on the appearance of a house.
 * Are a feature that is easy to add to your home.
 * Provide the most bang for your buck in beautifying your home.
 * Can ruin the entire appearance of your house if not done correctly.

Yes, exterior window shutters, just as windows, can be your best friend or worst
enemy. Exterior shutters can make or break the appearance of your house. **Window
shutters are the most abused in about 99% of homes.** Yes, exterior window shutters
can grossly subtract from a potentially beautiful house and make it look bland and
out-right ugly! The good news is that the bad can easily be fixed and allow your
house to come alive with beauty. Here we will explain what most homeowners and builders
are doing wrong and how easily exterior window shutters can make your house pop 
with beauty.

## The History of Exterior Window Shutters and How They Were Used.

Exterior wood window shutters over the course of history were not only aesthetically
pleasing but provided a necessary function with their many uses.

They were used for security, provided privacy from outsiders passing by, added an
extra layer of insulation during winter weather (with wood having a high R value)
and blocked out the sun, preventing damage to furniture.

Louvered shutters allowed a breeze to enter a home, keeping the room cool on a hot
summer day.

Earlier historic shutters were used for security in place of glass windows.

Shutters were either single board, or board-and-batten shutters (vertical wood slats)
which were used on cottages and primitive buildings.

Solid raised paneled shutters then appeared and provided a lighter, more elegant
look.

Fixed louvered shutters then came into use during the second half of the 18th century.

Historically, solid raised panel shutters were referred to as “shutters” while those
with louvered shutters were called “blinds”.

 

To the right you see a photo of shutters from Thomas Jefferson’s Monticello (1772).
Stiles and rails (the edges) on early louvered shutters were quite narrow.

Notice that the shutter is mounted off to the side of the window casing. This mounting
style was used only for early shutters such as these.

Many early louvered shutters when closed would not fit snuggly into the window but
instead rest against the window sash and stick out from the window.

This window has a separate set of window shutters for both the upper and lower sash.

 

Through the middle 19th century, most homes would have solid raised panel shutters
on the first floor for privacy and security.

On the second floor they would have louvered shutters to allow the breeze to enter
during the warm months.

Sometimes the first floor had white shutters. At night when closed a candle lit 
interior would appear brighter.

Dark colored louvered shutters on the second floor would provide darkness for daytime
napping.

An individual window shutter could also combined both features – a raised solid 
panel on the lower portion and louvers on the top part.

The example to the right shows an 1840’s window.

The shutter on the left is installed graphically from an old sepia-tone photo.

The shutter on the right is planned to be constructed by Shuttercraft to match.

[⌊historic board and batten shutters⌉⌊historic board and batten shutters⌉[

Historic Board and Batten shutters are used for privacy and security.

[⌊historic raised panel shutters and shutter hardware⌉⌊historic raised panel shutters
and shutter hardware⌉[

Raised panel shutters

 

[⌊fixed louved shutters monticello⌉⌊fixed louved shutters monticello⌉[

Thomas Jefferson’s Monticello 1772

 

 

[⌊historic shutters raised panel shutters first floor louvered second floor⌉⌊historic
shutters raised panel shutters first floor louvered second floor⌉[

1861 Green louver shutters on top floor, white raised panel shutters on first floor.
Click to enlarge.

[⌊shutter design louver and panel ⌉⌊shutter design louver and panel ⌉[

Original c. 1840 shutter from an old photo is pasted on left side of window. Reproduction
shutter mockup by Shuttercraft on right.

**“Operable Louvered Shutters”, louvers that are regulated by a tilt rod began to
be manufactured around 1830-1840. Before this the louvers were fixed in an open 
position.**

With the advent of the exterior [Storm Window ](https://www.oldhouseguy.com/wood-storm-windows/)
in the later 1800’s, shutters were sometimes removed and stored away before the 
cold months and wooden storm windows would be installed. Removal was easy – all 
you needed to do was lift the shutter off the pin on the hinge.

Exterior window shutters could also remain on the building, left in an open position.
If using storm windows, please note that this was all dependent on the type and 
mounting of the shutter hinge. It is possible that the storm window would not be
able to be inserted into the window jamb if a shutter hinge was in the way.

During the warm months, the storm windows would be removed and window shutters would
be closed to protect furniture from the sun and allow outside air to cool the house.

At the end of the Civil War, awnings ([Preservation Brief #44 – Awnings ](http://www.nps.gov/tps/how-to-preserve/briefs/44-awnings.htm))
became popular and [window screens ](https://www.oldhouseguy.com/wood-storm-windows/)
began to come into use. Screen windows were just like storm windows except they 
had screens in the wood frame. In addition to these screen windows, adjustable screens(
[The Adjustable Window Screen Company patent, 1866 ](https://www.oldhouseguy.com/assets/shutters/0001.f.cas.0175.4.pdf))
still sold in hardware stores today, or lace curtains also served the purpose. Visit
our page on [storm windows and window screens ](https://www.oldhouseguy.com/wood-storm-windows/).

In some styles of architecture, exterior shutters also began to fall out of fashion.
By the 1920’s, although some exterior window shutters were still used for practical
reasons, most were strictly decorative.

Those shutters that were purely decorative however, were still functional or had
the appearance of being functional. Homeowners could operate the shutter to cool
or insulate the home if they wished. **There was no difference to the appearance
of the house.**

Unfortunately, this changed during the 1950’s with the advent of Aluminum Siding
and Aluminum Shutters. This is when the dreadful problem we have today began.

### Where Exterior Window Shutters Went Wrong

The public has always been in love with the warm cozy feel of a traditional styled
home. Exterior wood window shutters provide that look and feel. Aluminum siding 
and fake aluminum shutters started to be heavily marketed in the 1950s.

To simplify installation of aluminum shutters on aluminum siding, the method of 
installing exterior window shutters – hanging shutters changed. **Window shutters
began to be installed by screwing the shutter onto the siding NEXT TO, instead of
directly on top of window casing, and without the use of hinges. **This was easy
and required minimal intelligence.

Eventually, people became more lazy, less knowledgeable, and more insensitive to
the appearance of their windows and began using the wrong size shutters. Before 
you knew it, they were putting rectangular shutters on arched windows and whatever
else you could imagine!

This is where we are today. As you may or may not know,** the window shutter has
evolved in a grossly unfortunate way**. Sadly,** we too have evolved to accept this
new bland look**. It is now normal and what we expect to see when we look at a house
with shutters. This is also what architects and builders do and what we see with
many exterior window shutter companies.

If you are not aware of the “bad window shutters” problem you soon will be.

**Read on and we will re-train your eyes to understand, see, and feel the impact
of a architecturally correct and incorrect window shutter**.

You will be the expert. We use the term Historic Shutter to represent a visually
correct, properly mounted and designed shutter, as all shutters should be, including
those used with contemporary architecture.

### Mistakes: Exterior Shutters Today vs Historic Shutters –

### What is Wrong and What to do Right

**The goal of this website is to enable readers to make their house architecturally
correct which would then be aesthetically pleasing.** I cannot emphasize enough 
the importance of correct exterior window shutters.

Think of the windows as the eyes of the house and the window shutters as the eyebrows(
although to the side) to understand the impact. If the shutters are the wrong type
or mounted incorrectly, they can ruin the appearance of the entire house.

Yes, **the money you spent on restoring that new front door or painting with authentic
Victorian colors will be wasted if your window shutters are incorrectly hung (mounted).**

Most people look at exterior window shutters as a decorative feature with no further
thought. The decorative shutters are installed and the mission is accomplished. 
How dreadfully wrong!

The following is what you need to look for and, once you see the difference, you
will pick it out every time. There are a number of points you need to understand
about exterior window shutters in order to make your house look great.

### Louvered Shutters.

On historic louvered shutters (historically called Blinds), the louvers were either
Fixed Louvers or Operable Louvers. Each type represents a different period in history
and provides a slightly different look.

#### Fixed Louvered Shutters.

Fixed Louvered shutters are appropriate for buildings built prior to the Civil War.
Operable louvered shutters grew popular quickly although fixed louvered shutters
remained in builders catalogs into the early 1900’s.

 * **The louvers are constructed in a fixed open position in order to allow a certain
   amount of air and light to pass through.**
 * **The louvers must be fixed at an angle in an approximately 60 degree open position.(
   a completely closed louver would be a flat apx. 10 degrees, perfectly horizontal
   would be 90 degrees.)**
 * **When the shutter is open the louvers angle pointing downwards towards the house.**
 * **When the shutter is closed, the louvers are angled pointing downwards away 
   from the house to shed water away from the window and block the sun’s rays from
   entering the room.**

There is an important aesthetic benefit with louvered window shutters. The louvers
create shadow lines which provide texture and interest. Shadow lines are most important
on a house for they create the character that bring buildings to life.

**Purchasing a Fixed Louvered shutter with flat closed louvers (10 degrees) as sold
in home improvement stores results in a flat artificial appearance due to the lack
of shadows.**

A historic operable louver shutter with louvers completely closed would never display
the flatness fake plastic shutters have. Unfortunately this is the type of shutter
you see on all houses today, no matter what the period architecture.

Some** shutter companies manufacture quality wood window shutters with louver’s 
that resemble plastic shutters**. Be careful! While the shutters may be well made
with quality wood the design is wrong and you will be wasting your money.

**Fixed Louvered Shutters:**

Have stationary slats in a fixed position apx. **50% open**.

The slats are angled downward and inward towards the house.

The louvers provide a nice texture when seen on a house.

Fixed louver shutters were used from mid 18th century through mid 19th century.

[⌊fixed louver shutters without tilt bar wood ⌉⌊fixed louver shutters without tilt
bar wood ⌉[

Fixed Louver Shutters

**Operable louvered shutters:**

Have operable louvers that can be adjusted to be opened or closed by a tilt bar.

The slats are angled downward and inward towards the house.

Louvers provide a nice texture and tilt bar adds to the appearance.

Operable louver shutters were installed on buildings from 1830’s-40 through 1950’
s.

[⌊operable louver shutters red shutters tilt bar⌉⌊operable louver shutters red shutters
tilt bar⌉[

Operable Louver Shutters

**Vinyl Shutters:**

Plastic shutters are fake and cheap looking.

There is minimal texture for louvers molded flat against each other in a permanently
closed position making them look flat and bland.

A cheap looking shutter provides cheap curb appeal.

Louvers are angled in the wrong direction.

Purchased by homeowners and builders that do not understand shutters and have not
read this website.

[⌊flat red vinyl shutters cheap looking⌉⌊flat red vinyl shutters cheap looking⌉[

Cheap Looking Vinyl Shutters

#### Operable Louvered Shutters

Operable Louvered Shutters were first used around 1830-1840. Operable louvered shutters
can be adjusted by a Tilt Rod to regulate air-flow and light. Shutters with operable
louvers and a tilt rod create a shadow pattern providing the best depth, contrast,
and character.

**If your goal is decorative window shutters they must still appear as if they are
operable.** A “fake” plastic shutter from a home improvement store has louvers that
are fixed in a tightly closed position than they normally would be if they were 
to actually operate. The amount of space opened would not need to be as great as
50 percent as Fixed Louvered shutters (as explained above), but should NOT be totally
flat either in order to look real.

**If your house was constructed after the Civil War, there should be a tilt rod 
on your window shutters.** This is an important feature that is always overlooked
and greatly affects its appearance. In this case a false Tilt Rod should be attached
to fixed shutters to appear operable. Failure to achieve this look will greatly 
sacrifice the appearance of the house.

When historic shutters are in the closed position, the louvers should be angled 
pointing downward and away from the house to shed water away from the window it 
is covering.

When shutters are in an open position, the louvers will be angled pointing downwards
toward the house. Water will be shed to the back of the shutter towards the house;
but, no need to worry, there will be air space from the hinge offset for runoff 
and drying.

### Shutter Size Errors

Another mistake which is almost always made, is improper shutter height and width.
The width of each shutter must equal half the size of the INSIDE of the window casing.
If **both shutters were to close they must sit inside and fill the window casing,**
covering the entire window in both height and width. Although you may never close
the shutters, this is just as important when decorative shutters are in an open 
position.

[⌊closed shutter diagram⌉⌊closed shutter diagram⌉[

Closed shutters.

**Two properly sized shutters must fit inside and fill the window casing when closed**

When you look at a window, your mind interprets it as a shape. When there are two
shutters (right and left), which are sized correctly, they represent two-halves 
of that shape (the window opening). Your mind recognizes this, and interprets this
equal balance as appealing. Sadly, most people ignore this and are probably busy
thinking about watching I Love Lucy re-runs, instead of taking the time to respond
to their natural inner senses.

[⌊red narrow shutters on large wide window⌉⌊red narrow shutters on large wide window⌉[

Shutters are too narrow to fill window when closed and too long – notice the bottom
of shutters extend to the window sill.

[⌊large shutters too tall and wide for small window⌉⌊large shutters too tall and
wide for small window⌉[

Shutters are too wide and too long.

[⌊real wood double shutters for different sized windows⌉⌊real wood double shutters
for different sized windows⌉[

These shutters are the perfect size for two different types of windows. Don’t be
distracted by the unattractive imitation-brick asphalt siding, which began production
in 1931.

### Shape Errors

Common sense will tell you that **shutters must also match the shape of the window**.
Many times you will see a beautifully arched window with a rectangular shutter. 
Your mind is working overtime interpreting these two different shapes and why are
they grouped together. Much can be learned by the child’s toy which requires the
correctly shaped block to be inserted into the correspondingly shaped hole. As you
see many homeowners never succeeded with this toy.

**Rectangular Shutters on Arched Windows**

[⌊double arched shutters should be on arched windows⌉⌊double arched shutters should
be on arched windows⌉[

WRONG

![rectangular shutters on arched window](https://www.oldhouseguy.com/images/shutters/
shutters2arch.jpg)

WRONG

**In the two pictures above, not only are the shutters the wrong shape, they are
also fake, too long for the window, and mounted incorrectly. Just because you pay
someone with years of experience to install shutters, doesn’t mean that they will
do it correctly. This injustice has already reached epidemic proportions.**

### Shutter Hanging (Mounting) Errors

Probably **the most prevalent mistake made is improper shutter installation**. This
makes a beautiful house look cheap, ugly, and bland. Sadly almost all shutters are
mounted this way and the public has evolved to accept this look. There are two parts
to this error.

The first part of the mistake is that shutters mounted directly on the facade/siding
of the house, appear banished off to the side of the window as if the window wants
no part of the shutter. Visually, **it MUST appear as if the shutters are mounted
directly ON TOP OF the window casing,** next to the window opening. Failure to do
this looks ridiculous and drastically changes the appearance of the entire house.
You are confusing your subconscious mind as it tries to interpret patterns and make
associations. What is this rectangular shape doing all by itself out there?

Another common mistake is mounting the shutters flat against the house. Here you
lose your shadow lines which result in a bland, uninteresting house. When shutters
are mounted directly to the face of a house, there is no room for ventilation between
the shutter and the house. This results in heat build up from the sun that can cause
damage to siding and painted finishes behind the shutter. **A correctly mounted 
shutter should APPEAR to be attached to a hinge, protruding from the house.**

There are a few technicalities in properly mounting shutters depending on your window
and the type of hinge used. However, the shutters should still have the same appearance
as in the examples of GOOD Shutters on this page. When open, ** shutters should 
be located tight to the window covering all or part of the window casing and projecting
outward at the window edge.**

**Architecturally, it is not necessary for a feature to actually be functional; 
however, it must always _appear_ functional.** Please understand, I think it is 
wonderful to have historic, functioning shutters, but the goal here is appearance.
That said, you may not need or want your shutters to open and close, but they MUST
appear as if they do. This is explained more in the next section on Exterior Shutter
Hinges.

[⌊Contact Old House Guy Services for shutter help⌉⌊Contact Old House Guy Services
for shutter help⌉[

## Exterior Shutter Hinges

Historic shutters were mounted on hinges. There are two parts to a shutter hinge.
One part is attached to the house and the other part is attached to the shutter.
The part of the shutter hinge that is attached to the house contains a Pintle – 
a pivot point for the shutter hinge to rest on. This part of the hinge can either
be mounted to the house on the face of the window casing OR on the inside edge (
jamb) of the window. **Each of the two mounting types provides a different appearance.**

There are many types and sizes of shutter hinges you can use. A lot depends on your
window and how much space you have to mount the hinge. These details and customizations
you should discuss with the shutter manufacturer. Here, on OldHouseGuy.com, you 
will learn what you need to know to get the proper look.

If you think your house originally had shutters, you can check to see where the 
original hinges were mounted by looking for “ghost marks”. Even after years of painting,
you should still be able to see these marks. You may even see them in both places(
edge and face) – this means your shutters and/or hinges were replaced. Most likely,
old face-mounted strap hinges were replaced in the late 19th century with newer 
hinges mounted on the inside edge.

### Shutter Hinge Throw – distance from window opening

One of the most important things to understand when ordering shutter hinges is a
term called “THROW”. This is the space between the pivot point of the hinge and 
the inside edge of the shutter when the shutter is open.

This is very important because if there is a large THROW, or large swing, there 
will be more space between the shutter and the hinge pivot point. In other words,
the shutter will be farther to the side, away from the window opening, exposing 
more of the window casing. This **large THROW will make your wonderful historic 
shutters appear just like all the fake plastic shutters you see mounted off to the
side of the window.**

As I stated earlier, each window is different and there does need to be some THROW
for your shutter to work. Do not get a hinge with a larger throw merely for the 
purpose of being able to see the wood casing. Sadly, this is becoming the standard
of the best quality shutter manufacturers. And why? Because the consumer is accustomed
to the wrong look and that is what they want to buy.

Below are examples of shutter throw and the type of shutter hinge used to get the
right  look.

[⌊shutter hinges tight to window⌉⌊shutter hinges tight to window⌉[

Correct: Shutter Throw is tight to window using a Jamb mounted Butt hinge.

Here the shutter is tight to the window because a Jamb hinge (Butt hinge) is used.
This look is **correct for a house built 1854 to present. It is also correct for
shutters using surface hinges after 1854.**

 

[⌊shutter throw half over casing⌉⌊shutter throw half over casing⌉[

Correct: Shutter throw is not as tight to window using Surface Mounted Hinges.

This shutter is off to the side because the hinge is mounted on the surface of the
window casing. This look is **correct for a house built before 1852**.** It is also
correct for a shutter with surface hinges after 1852.**

 

[⌊shutter offset with shutter to edge of window casing⌉⌊shutter offset with shutter
to edge of window casing⌉[

Correct for 18th century and early 19th century only. Casing should not be exposed
with a wide throw otherwise.

 

[⌊shutter hinges with shutter flat against facade⌉⌊shutter hinges with shutter flat
against facade⌉[

WRONG: A shutter should never be mounted this way.

NEVER mount a shutter this way on any house. This is where homeowners, builders,
and architects fail today.

### Shutter Hinge Offset & Standoff

**Exterior shutter hinge offset and stand off is the distance a shutter projects
from facade and angle of shutter**

I think it is wonderful to have operable shutters but there are technicalities specific
to your windows that you should discuss with the shutter manufacturer. My objective
on OldHouseGuy.com is to educate you on how your home can have the best appearance.
Once this is understood, and if you prefer operable shutters instead of merely decorative,
the next step of mechanics can be addressed with the manufacturer.

**This information is important even if your shutters are strictly decorative.**
The next thing you need to understand is the term hinge OFFSET. OFFSET and STANDOFF
are important terms in assuring your shutters will not only look good, but also 
open and close properly. These terms are sometimes used interchangeably.

The Offset and Standoff of the hinge pertains to the part of the hinge that is attached
to the house. This part of the hinge has a point or Pintle – a pivot point where
the shutter is connected.

**The Offset we will discuss here is the distance the hinge extends your shutters
AWAY from the window casing.** An OFFSET of about 1/2 to 1.5 inches is usually recommended,
although each window casing is different.

The Offset is important because the space provides necessary ventilation behind 
the shutter and creates additional shadow lines which make your house come alive
with interest. Shutters you see today are flat against both the window casement 
and the facade, without shadows, making the house look bland.

The outer edge – opposite edge of the shutter, away from the Offset hinge, should
rest closer to the facade of the house. The fully opened shutter can be secured 
with a Tie-Back attached to this outer edge (without this Tie-Back your shutters
will flap in the breeze). **The final result will be a shutter that is angled in
appearance.**

[⌊shutter offset showing pintle and shutter dog⌉⌊shutter offset showing pintle and
shutter dog⌉[

Shutter offset showing angle.

## Shutter Hinges – Which Type to Choose

There are two basic types of hinges: Edge Mounted and Surface Mounted.

### Edge Mounted Shutter Hinges (Jamb Hinge)

Edge Mounted Shutter Hinges are also referred to as Jamb Hinges or Butt Hinges. 
These hinges are **mounted to the Window Jamb** – the inside edge of the window 
casing. Hinge mounting depends on your window construction since the window jamb
needs sufficient space to attach the hinge. These hinges are mortised into the wood
casing and the shutter. For an example of an edge-mounted hinge, just take a look
at how a door hinge is mortised. The Acme Lull & Porter hinge was a very popular
edge mounted hinge in the later half of the 19th century and after. They were self-
locking, meaning when in an open-position, they locked in place, eliminating the
need for Tie Backs. The Acme Lull & Porter hinge was Patented in 1854. [Click here to see 1854 patent ](https://www.oldhouseguy.com/images/shutters/HingePatentInfo.pdf).

[⌊exterior shutter hinges - surface mounted on window casing⌉⌊exterior shutter hinges-
surface mounted on window casing⌉[

Surface mounted shutter hinge. Hinge throw is about 1 inch from window casing to
allow space for pintle. Window casing is partially visible. 1830 – present.

[⌊jamb mounted shutter hinges⌉⌊jamb mounted shutter hinges⌉[

Jamb mounted shutter hinge. Shutter covers window casing. Hinge is mortised into
edge of casing. 1854 – present.

### Surface Mounted Shutter Hinges

Surface Mounted Hinges are also referred to as Strap Hinges. These hinges are **
mounted to the FACE of the window casing**. These hinges are not mortised into the
wood. Strap Hinges are more visible due to the strap supporting the shutter. These
shutters also provide a different appearance. Since the hinge is attached to the
face of the casing, the pivot point can be no less than about an inch from the edge
of the window opening. This results in a slightly greater Throw than Edge Mounted
hinges since the point of origin is a bit farther away from the window edge. Surface
mounted hinges were most popular on structures built before the Civil War.

**_Remember with whatever type of hinge you use, try to keep the shutter as tight
to the window as possible unless your house dates back to very early 1800’s or earlier._**

### Surface Mounted Hinges for Recessed Windows (usually brick or stone houses)

There is a difference when mounting a shutter on a wood sided house compared to 
that of a house sided with Brick or Stone. The window is constructed the same but
instead of being surrounded by a wide casing, the window is surrounded by a brick
molding which is narrower than a casing.

On a WOOD sided house, the siding does not project beyond the face of the window
casing. Surface Mounted or Edge Mounted hinges can be used and the offset needed
is minimal.

On a BRICK or STONE sided house, the brick or stone projects beyond the face of 
the window casing. The window and casing are recessed. Here, a surface Mounted hinge
MUST be used and, depending on how deep the casing is recessed, a greater OFFSET
will be required. This will allow the shutter to clear the brick/stone siding when
swung open (if operable) or fixed in an open position.

[⌊exterior shutter hinges attached to brick mold on brick house⌉⌊exterior shutter
hinges attached to brick mold on brick house⌉[

Surface hinge is attached to face of brick mold. Offset extends shutter to face 
of bricks.

## Shutter Tie-Backs

A Tie-Back on a shutter is usually referred to as a Shutter Dog or Shutter Catch.
A Shutter Dog holds the shutter in place from the front. Since it is visible, there
are many decorative Dogs to choose from.

A Bullet Shutter Catch or Acorn Clip is a pin that holds the shutter in place from
behind. This is not visible when the shutter is in an open position.

[⌊shutter hardware - shutter dogs tie backs⌉⌊shutter hardware - shutter dogs tie
backs⌉[

Shutter Dogs

[⌊shutter hardware acorn clip⌉⌊shutter hardware acorn clip⌉[

Acorn Clip

## Other Shutter Hardware

There is a large selection of shutter hardware to choose from as you will see on
the recommended shutter sites. There are locks, bolts, pulls, tie-backs, etc. These
items will add additional visual interest to your shutters and house.

## Examples of Good vs Bad Window Shutters

[⌊plastic shutters mounted wrong⌉⌊plastic shutters mounted wrong⌉[

BAD: Shutters are mounted to sides of window and flat against siding. They look 
flat and cheap. No shadows.

[⌊wood operable louvered shutters⌉⌊wood operable louvered shutters⌉[

Good: Shutters are mounted on hinges on the window casing providing the appearance
of being able to close. Depth and details are obvious.

[⌊narrow shutters plastic ugly⌉⌊narrow shutters plastic ugly⌉[

Bad: Fake plastic shutters. Better to have nothing.

[⌊wood shutter with operable louvers⌉⌊wood shutter with operable louvers⌉[

Good: Historic wood operable louver shutter.

[⌊rectangular window shutters on arched italianate windows installed wrong⌉⌊rectangular
window shutters on arched italianate windows installed wrong⌉[

Cheap rectangular shutters. Better to have no shutters.

The following photos are all from the same house. I guess the owner was either confused
or had a short attention span because the shutters are hung three different ways.
There are many windows on this house. Some are correct, but most are wrong.

Hightstown NJ, is a very preservation minded town with some great buildings. Unfortunately,
this house is the exception looking like a clown house with its drunken mixed up
shutters.

First to the right we have a perfectly hung shutter.

Wood arched shutters with operable louvers.

 

 

 

 

 

The shutters on this window are installed backwards.

If the shutters were to close they would not fit into the arched shape of the window.

 

 

 

 

 

Here is another ridiculous looking window.

Rectangular shutters that are too tall on an arched window.

One would question the integrity of this homeowner.

** **

[⌊arched louvered wood shutters mounted correctly⌉⌊arched louvered wood shutters
mounted correctly⌉[

Good: Arched shutters mounted correctly.

[⌊wood shutters hung backwards⌉⌊wood shutters hung backwards⌉[

Bad: Arched shutters are hung backwards.

[⌊rectangular shutters on arched window⌉⌊rectangular shutters on arched window⌉[

Bad: Rectangular shutters on arched window. Wrong size.

[⌊real wood shutters mounted next to window casing⌉⌊real wood shutters mounted next
to window casing⌉[

Bad: Wood operable louver shutters are mounted wrong making them look plastic. They
are also the wrong size.

[⌊green wood louvered window shutters⌉⌊green wood louvered window shutters⌉[

Perfect shutters. These shutters are similar to those on the left except they are
mounted correctly. Notice the detail shadows make.

[⌊ugly board and batten shutters with narrow boards⌉⌊ugly board and batten shutters
with narrow boards⌉[

Bad: The perfect Board and Batten shutter for the deranged homeowner.

[⌊board and batten wood shutters moon cut-outs⌉⌊board and batten wood shutters moon
cut-outs⌉[

Good: This is a perfect Board and Batten shutter from the 1920’s.

Board and Batten shutters are the oldest type of shutters.

Use them on an 18th century cottage home.

They made their comeback in the 1920’s with cutouts designs.

NEVER EVER should they have spaces between the boards.

Homes with these shutters do not belong on this planet.

[⌊red board and batten shutters⌉⌊red board and batten shutters⌉[

Never should there be spaces between the boards.

[⌊painted window shutters⌉⌊painted window shutters⌉[

Bad: Painted shutters are the wrong size and in the wrong location. Shadows were
not painted.

[⌊glass window shutters insanity⌉⌊glass window shutters insanity⌉[

Bad: Just when you think you saw it all. Glass shutter insanity. Where do these 
people come from?

[⌊garage shutters mistake⌉⌊garage shutters mistake⌉[

Bad: Guess the homeowner doesn’t know this is a garage. What’s next – shutters on
a chimney?

[⌊plastic arched window shutters⌉⌊plastic arched window shutters⌉[

Bad: Backwards arched shutters on square window.

[⌊bunny shutter insanity⌉⌊bunny shutter insanity⌉[

Shutter insanity. Look closely. The homeowner attached shutter tops to make bunny
ears. I’m more curious to see what the homeowners look like.

 

[⌊bad shutter installation⌉⌊bad shutter installation⌉[

These shutters are so wrong that the town put up a sign about them. The sided bay
looks like a wart on this house and the shutters look like ears.

There is an epidemic of contractors AND homeowners destroying the character of  
homes as seen in the above examples. This incorrect way is now the standard! **If
shutters cannot be mounted properly, a house would be better without any at all;**
otherwise, they can ruin a house and even the neighborhood. As you drive down the
street, begin paying attention to shutters and you will now see the difference.

## Window Shutter Options

**Give up? Don’t want to buy new exterior wood shutters?**
 **Check out some Optional
Mounting and Shortcuts for Vinyl Shutters**

By now you should thoroughly understand the correct and ideal way to mount shutters
is to use hinges even if you plan to only use your shutters as decoration. There
is one option, or should I say a trick, to be used only as a last resort. I only
provide this information to those who will not purchase hinges as advised, in my
effort to reduce the number of ugly houses.

Even if you have a vinyl sided home, with vinyl shutters, and have no intention 
on replacing them, you can still achieve a more authentic look.

Screw two, 1-inch thick blocks of wood on each side of the window casing near the
opening where the hinge would normally be. You may need to shave off the outside
corners of the blocks. Take the shutter and screw it to the blocks of wood on the
window side, and the other end of the shutter directly to the facade of the house.
This will result in an angled shutter – creating additional shadows – resulting 
in a much much better looking home.

Another shortcut is attaching a false tilt rod. Purchase a wooden dowel, paint it
and attach it to your louvered shutters with a liquid nails adhesive.

## Shutters for Other Types of Windows and Spaces

Depending on the style of your house, each window does not have to be shuttered.
This is determined mostly by architectural design and window style. For example,
on a Queen Anne style house, windows in a tower may or may not be shuttered. Larger
ornate or smaller sized windows can be left without shutters or may only need one
shutter on one side of the window (fit to cover the entire window).

Think in terms of shutter use.

1.) Back in the day, would it have been practical or useful to have shutters on 
this window?

2.) If not useful, would it provide balance in design or match another window with
shutters? Colonial style architecture is symmetrical and you need to maintain this
symmetry.

A Ganged window is two windows side by side separated by a mullion (a vertical piece
of wood separating the windows – part of casing). In this situation, you have a 
few choices (not in any order), but first look for ghost marks of earlier hinges.
If the window had shutters there would be ghost marks of hinges visible.

 1. Attach a large (double size) shutter, the size of the window on each end.
 2. Mount double shutters at each end. The shutters would appear single, but actually
    are two hinged shutters, folded over. The shutter will close from one side for 
    each of the two windows. The visual effect of patterns will not be disturbed.
 3. Mount four shutters in the manner you would normally if the window were not Ganged.
    Since there is minimal space at the mullion between the two windows, the shutters
    will remain in a semi-opened position and held in place with a tie-back attached
    to the sill, extended out to the shutter. I have seen this method in original 19th
    century design plans. If you find ghost lines, you have your answer.

There will be other situations where a window is next to a down-spout or a wall 
of a house where the shutter will not be able to be parallel to the house when open.
Do not omit the shutter.

**Here are some examples:**

_**Unless noted all examples are historically correct.**_

[⌊double shutters for large window⌉⌊double shutters for large window⌉[

Double shutters for wide or ganged windows. Use these instead of mounting shutters
in the center between the windows. These shutters do not fold.

 

[⌊wide shutters⌉⌊wide shutters⌉[

Non folding wide shutters with operable louvers at the bottom.

 

[⌊double folding shutters open position⌉⌊double folding shutters open position⌉[

Double folding panel shutters in open position. Notice the hinges giving you the
option of hanging them full or folded. An option for double or wider windows.

 

[⌊double folding shutters folded position⌉⌊double folding shutters folded position⌉[

Double folding shutters shown in folded position. Double shutters are folded in 
half.

 

[⌊side view folded louver shutter⌉⌊side view folded louver shutter⌉[

Side view showing folded shutter. Face mounted hinges. See Acorn snap at bottom 
to hold shutters together.

 

[⌊large wide green window shutters⌉⌊large wide green window shutters⌉[

These shutters are on a bank. They are way too wide to be single shutters. They 
must be folding to avoid looking dumb. Additionally they are mounted incorrectly
to the face of the brick instead of the brick mold which is probably too narrow 
anyway.

 

[⌊wide window overlapping shutters⌉⌊wide window overlapping shutters⌉[

Center bay window is wider and has double shutters that do not fold but overlap.

 

[⌊working shutters⌉⌊working shutters⌉[

Operable shutters being used on a hot day.

 

[⌊arched shutters on bay⌉⌊arched shutters on bay⌉[

The way to attach shutters when windows are too close.

 

[⌊mounting shutters in corner⌉⌊mounting shutters in corner⌉[

How to mount shutters in tight places.

 

[⌊bay window shutters⌉⌊bay window shutters⌉[

Shutters can still be installed on a bay window.

 

[⌊overlapping shutters 18th century house⌉⌊overlapping shutters 18th century house⌉[

Overlapping shutters on 18th century house.

### What Shutter Styles are Right for My House?

Look at old photos. If you don’t have any, look around your neighborhood for similar
houses and see the kind they have. You can usually tell if the shutters are original.
Keep in mind that your house **may have been built in 1800 and the shutters replaced
in 1900** with a style popular at that time. Shutter styles and hardware are also
regional. You can contact your local Preservation Commission if you have one although
I doubt if any of them could provide any help. Try them anyway; if not, call a Preservation
Architect and ask for a recommendation. Your State Historic Preservation Office 
will have a listing of qualified Preservation Architects and consultants.

Many buildings before 1750 had exterior shutters. During this time and through the
mid 1800’s interior shutters were common. Some homes had both interior and exterior
shutters. Some early homes that only had interior shutters, later added exterior
shutters.

Board and Batten shutters and Raised Panel shutters were used during the 18th century
and into the 19th century. Strap Hinges were used and Rat-tail style tie-backs were
most popular. Note that Board and Batten shutters do NOT have spaces between the
boards like those made today. Board and Batten shutters varied, some with tongue-
and-groove planks. These shutters were used on cottages and more primitive structures
while raised panel shutters appeared on more refined structures.

At the end of the 18th century louvered shutters began to gain in popularity. Up
to the Civil War, homes had raised paneled shutters on the first floor for privacy
and security, but did not have any shutters on the 2nd floor. Louvered shutters 
were often added to the 2nd floor as a later addition.

Around 1800-1830, Butt hinges came into use but were not popular since they broke
easily. Strap Hinges were the most popular. Tie-backs rods were mounted on the sill.
Most styles were dependent on what the local blacksmith produced. Operable Louvered
shutters began being manufactured 1830-1840.

At the time of the American Civil War, the Industrial Revolution was in full swing
and steel suddenly became less expensive. Acme Lull & Porter, Butt and “H” Style
hinges were being produced and became popular, although Strap hinges were still 
available. “L” shaped surface mounted hinges came about in the late 19th century.

The Acme Lull & Porter hinge was actually patented in 1854. [Click here for patent details ](https://www.oldhouseguy.com/images/shutters/HingePatentInfo.pdf).

From what I have seen in the New Jersey area, most Victorian and Colonial Revival
houses have Edge Mounted Acme Lull & Porter hinges with operable louvered shutters.
This is the same for pre-Civil War architecture, but in this case, probably, because
their original strap hinges were replaced with the more contemporary and popular
hinges of Victorian times. Unfortunately today, shutter manufacturers are selling
Surface mounted hinges for every type of architecture. Please be aware of this.

“S” style Shutter Dogs were mass produced in 1930’s. They should be used only on
houses built during or after this period only. Early 20th century architecture such
as Arts and Crafts, Bungalow, and Foursquare homes were usually without shutters.

From 1915 through the 1920’s, Colonial and Cottage style homes had mostly solid 
panel shutters with cut-out designs. Louvered and the rustic Board & Batten shutters
were also used occasionally. Although rare on Arts & Crafts homes, If Bungalow and
Four-Square homes had shutters, they were usually solid panel with cut-out designs
or half-louvered.

**Here are some shutters from the 1920’s period.**

[⌊black panel shutter fleur de lis cut out⌉⌊black panel shutter fleur de lis cut
out⌉[

1920’s panel shutter with cut out on first floor.

[⌊black shutters fleur de lis cut out half louverd⌉⌊black shutters fleur de lis 
cut out half louverd⌉[

Black half panel with cut out and fixed louvers on the 2nd floor.

I was surprised to see a 1920’s Colonial house following the format of an early 
18th century house. This house has paneled shutters on the first floor and louvered
on the second floor.

[⌊green fixed louvered shutters tree cut out⌉⌊green fixed louvered shutters tree
cut out⌉[

Fixed louvered shutters.

[⌊black operable louvered shutters with cut outs⌉⌊black operable louvered shutters
with cut outs⌉[

Operable louvered shutters with tilt bar.

[⌊black board and batten shutter with cutout⌉⌊black board and batten shutter with
cutout⌉[

1920’s Board and Batten shutter with cutout.

[⌊green board and batten shutter with cutout⌉⌊green board and batten shutter with
cutout⌉[

Never have spaces between boards.

Board and Batten shutters from the 18th century would not have the decorative cutouts.
Those with cutouts are from the 1920’s. All Board and Batten shutters would have
either cross bracing as in the photos above or “Z” bracing.

### Wood Window Shutters Maintenance – Keeping your Shutters Out of the Landfill.

If you have your original shutters, treat them as if they were gold. Just because
they’re rotted does NOT mean they cannot be repaired. Use a high quality exterior
wood filler for rotted wood (not bondo).

Keep them painted. If the louvers are operable, be cautions of paint buildup. When
you have your house painted, the painters will probably offer to replace your real
shutters free of charge with fake vinyl shutters. This is easier for them than scraping,
repairing, and painting the original ones. Don’t depend on painters or contractors
to mount them properly – almost 100% are ignorant when it comes to this. The result
is more harm than good. You are now the expert and must instruct them.

There are not many places that make shutters today and they’re very expensive; so,
maintain your shutters, protect your investment, preserve history, and let your 
house shine with character.

I also suggest attaching a copper or painted metal cap using an adhesive to the 
top of the shutters for water protection.

### Going Green – Back to Basics to Protect the Environment

“R” value for a glass window is about an R-1 rating. A piece of solid wood 1 1/8
inch thick is R-1.755. A closed wood shutter will therefore provide approximately
R-2.78 of insulation. Add an interior storm window for additional insulation.

### Non-Wooden Shutters

After all you learned so far, a vinyl or aluminum shutter doesn’t even qualify as
a shutter. However, we all need to be more conscious of our planet and our forests
and the depletion of our natural resources. **Remember (wood shutter owners), it
is better to maintain and repair than replace.** There are many new man-made products
being invented to replace the use of wood. However, they **must be indistinguishable
from the product they replace at an arm’s distance**.

### Painting Shutter Colors.

By far the most popular color for shutters throughout history is dark green – Benjamin
Moore, Essex Green, Gloss to be exact. Secondary colors were black or a red color.
Darker shades were favored to continue the visual concept of the window void when
shutters are closed.

### Purchasing Exterior Window Shutters.

Ok, you now know how a shutter should look on a house. You also know how important
this is. With what you know, **it is up to you to articulate what you want to the
shutter salesperson.**

Remember, **LET THE BUYER BEWARE**. DO NOT assume that since you’re paying a lot
of money, and buying from a recommended shutter manufacturer that specializes in
Historic Buildings, you can be assured you will get Shutters and Hardware that will
make your home look as it did 100 years ago. There are some good manufacturers out
there that produce historically accurate shutters and hardware. You still need to
order the right products to get the look you want. Use the wrong hardware to hang
them and you just wasted your money. Your house does NOT have to be historic. If
your house was just built, the same rules above apply – it’s all about making your
house look the best it can.

Remember, mounting shutters to the side of the window frame is wrong. For buildings
constructed prior to the Civil War when Strap Hinges were used, some of the casing
may be visible due to the Pintle being mounted more centered on the face of the 
casing.

People are accustomed to seeing improperly hung shutters. They are accustomed to
seeing the trim around the window not being covered up by a shutter. Manufacturers
are catering to this demand of the public and are offering them what they want. 
Don’t worry! You CAN still get the look you want by being an educated customer.

Shop around for shutters. Check their websites and get their brochures. Look at 
their sample photos. Do they look like original shutters or fake? Your eyes are 
educated now. Sadly, many of the sample photos in brochures I have seen look fake
due to the type of hinges used. Don’t let this stop you, they should still carry
the hinges you need.

Next, read every page of the sites I list below. Compare the dimensions, rail height,
type of wood, and all the types of hardware available on each site.

Next, print out one of the shutter measurement guides and hardware worksheets available
on the manufacturer’s websites. Physically examine your window frame on the exterior
and plot the dimensions.

Congratulations, you are now ready to call a few manufacturers and explain:

 * What shutter style you want.
 * If it will be a working shutter, additional specifications and options such as
   rabbeted edge, and working louvers, faux or working tilt rods, etc.
 * The appearance you want – how you want the shutter hung. They will then advise
   you on hardware to get that look. You will need a diagram/worksheet while discussing
   this.

Once you receive your new shutters, install one as a test. If you are not happy 
with how it looks or operates, you will need to exchange the hardware.

I hope this information has helped you. The purpose of this site is to educate you
and guide you in making a purchase that will make your home look as authentic as
possible. Please let me know if you think anything should be added or may need a
better explanation.

### Old House Guy Shutter Recommendation

 * **[Shuttercraft Custom Wood Shutters ](http://shuttercraft.com/index.html?source=OldHouseGuy)**
 * **[Larson Shutter Company ](https://www.larsonshutter.com/cedar-shutters-exterior.html)**